Valiant's Solutions

GPS, Primary Reference Clock with IEEE-1588v2 PTP Grandmaster and NTP

GPS Primary Reference Clock and PTP IEEE-1588v2 Grandmaster Clock, NTP Server (IPv4 and IPv6). Provides IRIG-B, 1PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits GPS referenced clock outputs. OCXO and Rubidium Holdover Clock options available.

Multiplexers

Valiant Communications offers a wide range of state-of-the-art network access E1 and SDH multiplexer solutions. Valiant's prestigious customers include some of the world telecom majors and other important and satisfied customers in over 90 countries. Valiant presents its next generation STM-1 / STM-4 / STM-16 SDH Multiplexers with E1, E3, STM-1e (electrical), STM-1o (optical), 10/100 Mbps ethernet tributaries and GigE interfaces.

E1 PRI ISDN (Q.931) Multiplexers and E1 Channel Banks

Valiant Communications offers a wide range of intelligent channel banks, E1 voice and data drop-insert add-drop multiplexers, E1 PRI ISDN (Euro ISDN) Q.931. multiplexers. Voice and data interfaces include FXO, FXS, E&M, V.35, V.24, RS232, Nx64Kbps, G.703, X.21, RS530, iDSL, 10BaseT Ethernet Bridge, 10BaseT Ethernet Router interfaces.

E3 PDH (2/34Mbps) Multiplexer

Valiant's E3, 2/34Mbps multiplexer is a third order skip multiplexer / demultiplexer unit, based on PDH (Plesiochronous Digital Hierarchy) technology. It multiplexes 16, 2.048Mbps E1 tributaries into a single 34.368Mbps E3 tributary. The multiplexer / demultiplexer also does the reverse processing i.e. demultiplexing a received 34Mbps stream into 16, 2Mbps E1 tributaries.

STM-1 / STM-4 / STM-16 SDH Multiplexers

Valiant offers next generation STM-1 (optical and electrical), STM-4 and STM-16 SDH multiplexers to provide multiple services from E1 / T1 tributaries (software configurable as E1 or DS1), E3 / DS3 tributaries (software configurable as E3 or DS3), 10/100Base-T Ethernet, STM-1/4/16 and GigE interfaces.

Optical Multiplexers and Fiber Optic Modems

Valiant offers next generation STM-1 (optical and electrical), STM-4 and STM-16 SDH multiplexers to provide multiple services from E1 / T1 tributaries (software configurable as E1 or DS1), E3 / DS3 tributaries (software configurable as E3 or DS3), 10/100Base-T Ethernet, STM-1/4/16 and GigE interfaces.

VCL-MX Packet Optical Transport IEEE-1588v2 PTP Synchronization

Provides legacy Voice, Data and C37.94 Teleprotection over Packet Optical / Gigabit Ethernet / IP / MPLS networks. Uses IEEE-1588v2 PTP synchronization technology to provide time-of-day and frequency synchronization GPS source.

Data Sheet (PDF)

Teleprotection Equipment

VCL-TP, Teleprotection / Digital Protection Signaling Equipment is an extremely rugged product has been designed to operate reliably even under the most demanding conditions and environment. The VCL-TP, Teleprotection Equipment offers up to 8, 2-way independent command channels which can be operated selectively, in a combination, or simultaneously either over an IEEE C37.94 compliant optical fiber link or over a G.703, 64Kbps co-directional digital data link.

VCL-GPS-2145 – PTP Grandmaster

VCL-GPS IEEE-1588v2 PTP Grandmaster and Primary Reference Clock, NTP Server (IPv4 and IPv6), provides IRIG-B, 1PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits with SSM, 1.544Mbits GPS referenced clock outputs. OCXO and Rubidium Holdover Clock options available.

VCL-2145-LC – Primary Reference Clock

VCL-2145-LC, 50 Channel GPS, L1 frequency, C/A Code Receiver and Primary Reference Clock is a reliable, high performance, cost efficient ITU-T G.811, G.812, G.813 compliant frequency synchronization solution which can be used as a primary frequency source in all types of frequency synchronization applications.

VCL-2112-SLV – PTP Slave

VCL-PTP-2112, PTP Slave Clock is a high precision, high reliability time and frequency synchronization solution which can be used to synchronize with an IEEE-1588v2 PTP Grandmaster to provide reference frequency and time-of-day synchronization across all nodes of a PTP network. Multiple 1PPS / IRIG-B Outputs are also provided to synchronize local clock (time-of-day) display units as well as RTUs to a central timing source with nanosecond accuracy.

VCL-2103 – NTP Sub-Master Clock

VCL-2103: High Performance NTP Sub-Master Clock:

  • IPv4 and IPv6 compliant NTP Sub-Master Clock
  • NTP/SNTP Date and Time Synchronization
  • 1 x 10/100/1000BaseT Ethernet NTP Client for master-side synchronization
  • 4 x 10/100BaseT Ethernet NTP/SNTP Master client-side synchronization
  • High-Performance NTP Server
  • Capable of driving up to 1000, VCL-W-KLOX, NTP/SNTP Slave display devices
  • Remote Management over TCP-IP Network
  • Dual, 1+1 Redundant 90VAC-240VAC, 50-60Hz,

VCL-2106 – Time Display units

VCL-W-KLOX High Reliability Time Display Unit:

  • Uses external NTP or IRIG-B source for accurate time synchronization
  • May be provisioned for installing with 1+1 Redundant NTP Servers
  • The VCL-W-KLOX shall automatically fall back to the Standby NTP Server if the Primary NTP Server becomes un-available
  • High Stability Oscillator for standalone operation (in the event of the un-availability of the external time source)
  • LED Status Indicator / LED Alarm to indicate loss of synchronization with Master Clock
  • The clock drift is less than ± 0.1 second in a 24 hour time-period in the absence of remote Synchronization
  • Extremely high clock accuracy
  • NTP synchronization option (better than 1ms accuracy – network dependant)
  • 100 microseconds with IRIG-B synchronization option
  • Optional PoE (Power Over Ethernet
  • RS232, USB and 10/100BaseT Management Interface
  • Temperature Operating Range: -20C to +65C

VCL-GPS-2145,
GPS, Primary Reference Clock with IEEE-1588v2 PTP Grandmaster and NTP

GPS Primary Reference Clock and PTP IEEE-1588v2 Grandmaster Clock, NTP Server (IPv4 and IPv6). Provides IRIG-B, 1PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits GPS referenced clock outputs. OCXO and Rubidium Holdover Clock options available.

Data Sheet (PDF)

VCL-GPS-2145-D,
1+1 Redundant GPS, Primary Reference Clock with IEEE-1588v2 PTP Grandmaster and NTP

1+1 Redundant GPS, Primary Reference Clock, IEEE-1588v2 PTP Grandmaster, NTP Server (IPv4 and IPv6). Provides IRIG-B, 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits GPS referenced clock outputs. OCXO and Rubidium Holdover Clock options available.

Data Sheet (PDF)

VCL-2145-LC,
GPS Primary Reference Clock (PRC)

GPS Primary Reference Clock (PRC) provides 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits with SSM, 1.544Mbits clock outputs with high stability OCXO Holdover Clock. Rubidium Clock option available.

Data Sheet (PDF)

VCL-2145-SLV,
PTP IEEE-1588v2 Slave Clock

PTP Slave Clock (IEEE-1588v2) for ToD (Time-of-Day) and Frequency Synchronization - synchronizes to PTP Grandmaster to provide IRIG-B, 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits clock outputs. OCXO and Rubidium Holdover Clock options available.

Data Sheet (PDF)

VCL-2112-SLV-LC,
PTP IEEE-1588v2 Slave Clock

PTP Slave Clock (IEEE-1588v2) for ToD (Time-of-Day) and Frequency Synchronization - synchronizes to PTP Grandmaster to provide IRIG-B, 1 PPS, NMEA, 1/5/10MHz, 2.048MHz, 2.048Mbits, 1.544Mbits clock outputs. OCXO and Rubidium Holdover Clock options available.

Data Sheet (PDF)

VCL-E1oP (2E1 Port IEEE-1588 Version)

VCL-E1oP' E1 over Packet (2 E1 Port IEEE-1588v2 Version) TDM over IP equipment supports transmission of up to 2 x E1 links over IP / Ethernet, MEF or MPLS networks and synchronization using IEEE-1588v2 protocol. The 'VCL-E1oP' E1 over Packet (2 E1 Port IEEE-1588 Version) TDM over IP equipment with IEEE-1588 protocol engine which provides a highly reliable clock recovery mechanism for extremely low jitter and wander control, even under variable network conditions.

Technical Specifications
Data Sheet (PDF)

VCL-E1oP (8E1 Port IEEE-1588 Version)

VCL-E1oP' E1 over Packet (8 E1 Port IEEE-1588v2 Version) TDM over IP equipment supports transmission of up to 8 x E1 links over IP / Ethernet, MEF or MPLS networks and synchronization using IEEE-1588v2 protocol. The 'VCL-E1oP' E1 over Packet (8 E1 Port IEEE-1588 Version) TDM over IP equipment with IEEE-1588 protocol engine which provides a highly reliable clock recovery mechanism for extremely low jitter and wander control, even under variable network conditions.

Technical Specifications
Data Sheet (PDF)

VCL-T1oP (2T1 Port IEEE-1588 Version)

'VCL-T1oP' T1 over Packet (2 T1 Port IEEE-1588v2 Version) TDM over IP equipment supports transmission of up to 2 x T1 links over IP / Ethernet, MEF or MPLS networks and synchronization using IEEE-1588v2 protocol. The 'VCL-T1oP' T1 over Packet (2 T1 Port IEEE-1588 Version) TDM over IP equipment with IEEE-1588 protocol engine which provides a highly reliable clock recovery mechanism for extremely low jitter and wander control, even under variable network conditions.

Technical Specifications
Data Sheet (PDF)

VCL-T1oP (8T1 Port IEEE-1588 Version)

'VCL-T1oP' T1 over Packet (8 T1 Port IEEE-1588v2 Version) TDM over IP equipment supports transmission of up to 8 x T1 links over IP / Ethernet, MEF or MPLS networks and synchronization using IEEE-1588v2 protocol. The 'VCL-T1oP' T1 over Packet (8 T1 Port IEEE-1588 Version) TDM over IP equipment with IEEE-1588 protocol engine which provides a highly reliable clock recovery mechanism for extremely low jitter and wander control, even under variable network conditions.

Technical Specifications
Data Sheet (PDF)

VCL-E1oP (2E1 Port FE)

'VCL-E1oP' E1 over Packet (2 E1 Port FE Version) TDM over IP equipment supports transmission of up to 2 x E1 links over IP / Ethernet, MEF or MPLS Pseudo-wire networks. The ‘VCL-E1oP' E1 over Packet (2 E1 Port FE Version) TDM over IP equipment, equipped with a powerful ARM-Cortex Processor which provides a highly reliable clock recovery mechanism for low jitter and wander control, even under variable network conditions.

Technical Specifications
Data Sheet (PDF)

VCL-E1oP (2E1 Port GE)

'VCL-E1oP' E1 over Packet (2 E1 Port GE Version) TDM over IP equipment supports transmission of up to 2 x E1 links over IP / Ethernet, MEF or MPLS Pseudo-wire networks. The 'VCL-E1oP' E1 over Packet (2 E1 Port GE Version) TDM over IP equipment, equipped with a powerful PowerPC 400 MHz Processor which provides a highly reliable clock recovery mechanism for low jitter and wander control, even under variable network conditions..

Technical Specifications
Data Sheet (PDF)

VCL-E1oP (4E1 Port FE)

'VCL-E1oP' E1 over Packet (4 E1 Port FE Version) TDM over IP equipment supports transmission of up to 4 x E1 links over IP / Ethernet, MEF or MPLS Pseudo-wire networks. The ‘VCL-E1oP' E1 over Packet (4 E1 Port FE Version) TDM over IP equipment, equipped with a powerful ARM-Cortex Processor which provides a highly reliable clock recovery mechanism for low jitter and wander control, even under variable network conditions..

Technical Specifications
Data Sheet (PDF)

VCL-E1oP (8E1 Port GE)

'VCL-E1oP' E1 over Packet (8 E1 Port GE Version) TDM over IP equipment supports transmission of up to 8 x E1 links over IP / Ethernet, MEF or MPLS Pseudo-wire networks. The 'VCL-E1oP' E1 over Packet (8 E1 Port GE Version) TDM over IP equipment, equipped with a powerful PowerPC 400 MHz Processor which provides a highly reliable clock recovery mechanism for low jitter and wander control, even under variable network conditions.

Technical Specifications
Data Sheet (PDF)

VCL-E1oP (16E1 Port GE)

'VCL-E1oP' E1 over Packet (16 E1 Port GE Version) TDM over IP equipment supports transmission of up to 16 x E1 links over IP / Ethernet, MEF or MPLS Pseudo-wire networks. The 'VCL-E1oP' E1 over Packet (16 E1 Port GE Version) TDM over IP equipment, equipped with a highly reliable clock recovery mechanism for low jitter and wander control, even under variable network conditions..

Technical Specifications
Data Sheet (PDF)

VCL-E1oP (32E1 Port GE)

'VCL-E1oP' E1 over Packet (32 E1 Port GE Version) TDM over IP equipment supports transmission of up to 32 x E1 links over IP / Ethernet, MEF or MPLS Pseudo-wire networks. The 'VCL-E1oP' E1 over Packet (32 E1 Port GE Version) TDM over IP equipment, equipped with a highly reliable clock recovery mechanism for low jitter and wander control, even under variable network conditions..

Technical Specifications
Data Sheet (PDF)

VCL-T1oP (2T1 Port FE)

'VCL-T1oP' T1 over Packet (2 T1 Port FE Version) TDM over IP equipment supports transmission of up to 2 x T1 links over IP / Ethernet, MEF or MPLS Pseudo-wire networks. The 'VCL-T1oP' T1 over Packet (2 T1 Port FE Version) TDM over IP equipment, equipped with a powerful ARM-Cortex Processor which provides a highly reliable clock recovery mechanism for low jitter and wander control, even under variable network conditions.

Technical Specifications
Data Sheet (PDF)

VCL-T1oP (2T1 Port GE)

'VCL-T1oP' T1 over Packet (2 T1 Port GE Version) TDM over IP equipment supports transmission of up to 2 x T1 links over IP / Ethernet, MEF or MPLS Pseudo-wire networks. The 'VCL-T1oP' T1 over Packet (2 T1 Port GE Version) TDM over IP equipment, equipped with a highly reliable clock recovery mechanism for low jitter and wander control, even under variable network conditions.

Technical Specifications
Data Sheet (PDF)

VCL-T1oP (4T1 Port FE)

'VCL-T1oP' T1 over Packet (4 T1 Port FE Version) TDM over IP equipment supports transmission of up to 2 x T1 links over IP / Ethernet, MEF or MPLS Pseudo-wire networks. The 'VCL-T1oP' T1 over Packet (4 T1 Port FE Version) TDM over IP equipment, equipped with a powerful ARM-Cortex Processor which provides a highly reliable clock recovery mechanism for low jitter and wander control, even under variable network conditions.

Technical Specifications
Data Sheet (PDF)

VCL-T1oP (8T1 Port GE)

'VCL-T1oP' T1 TDM over Packet (8 T1 Port GE Version) TDM over IP equipment supports transmission of up to 8 x T1 links over IP / Ethernet, MEF or MPLS Pseudo-wire networks. The 'VCL-T1oP' T1 over Packet (8 T1 Port GE Version) TDM over IP equipment, equipped with a highly reliable clock recovery mechanism for low jitter and wander control, even under variable network conditions.

Technical Specifications
Data Sheet (PDF)

VCL-T1oP (16T1 Port GE)

'VCL-T1oP' T1 over Packet (16 T1 Port GE Version) TDM over IP equipment supports transmission of up to 16 x T1 links over IP / Ethernet, MEF or MPLS Pseudo-wire networks. The 'VCL-T1oP' T1 over Packet (16 T1 Port GE Version) TDM over IP equipment, equipped with a highly reliable clock recovery mechanism for low jitter and wander control, even under variable network conditions..

Technical Specifications
Data Sheet (PDF)

VCL-T1oP (32T1 Port GE)

'VCL-T1oP' T1 over Packet (32 T1 Port GE Version) TDM over IP equipment supports transmission of up to 32 x T1 links over IP / Ethernet, MEF or MPLS Pseudo-wire networks. The 'VCL-T1oP' T1 over Packet (32 T1 Port GE Version) TDM over IP equipment, equipped with a highly reliable clock recovery mechanism for low jitter and wander control, even under variable network conditions..

Technical Specifications
Data Sheet (PDF)

VCL-DS3oP - DS3 / T3 over IP

'VCL-DS3oP', DS3 (T3) over IP / Ethernet equipment provides transmission of one, point-to-point, DS3 (T3) link over an IP / Ethernet, MEF or MPLS network. The 'VCL-DS3oP', DS3 (T3) over IP / Ethernet equipment is powered by a powerful PowerPC 400 MHz Processor which provides a highly reliable clock recovery mechanism for low jitter and wander control, even under variable network conditions.

Technical Specifications
Data Sheet (PDF)

VCL-E3oP - E3 over IP

'VCL-E3oP' (E3 over IP) equipment is used to transport a single E3 interface over an IP, MPLS or Ethernet network. The VCL-E3oP' (E3 over IP) equipment, is equipped with a powerful PowerPC 400 MHz Processor which provides a highly reliable clock recovery mechanism for low jitter and wander control, even under variable network conditions.

Technical Specifications
Data Sheet (PDF)

Gigabit Ethernet over SDH (STM-4) Converter

Gigabit Ethernet over SDH (STM-4) Equipment is a compact and high-performance Gigabit Ethernet to STM-4 converter (with VLAN TAG function), which offers three Gigabit Ethernet interfaces (2 Electrical and 1 Optical Ethernet interfaces) and 2 x STM-4 interfaces.
Gigabit Ethernet over SDH (STM-4) – Available bandwidth on a single Ethernet port on an STM-4 link is 622Mbps (up to 1000Mbps on 2 x bonded STM-4 links).

Data Sheet (PDF)

Gigabit Ethernet over SDH (STM-1) Converters

Gigabit Ethernet over SDH (STM-1) provides a simple, cost effective and compact solution to convert 10/100/1000Base-T (Gigabit) data interface on the user side and transport Ethernet traffic over a STM-1 (155Mbps) SDH link and reconstruct the data back to ethernet frame format, at remote end. The converter is an effective method for converting and transporting 10/100/1000Base-T (Gigabit) ethernet data over an STM-1 (155Mbps) SDH link.
Gigabit Ethernet over SDH (STM-1) – Available bandwidth on a single Ethernet port on an STM-1 link is 137Mbps.

Data Sheet (PDF)

Ethernet over SDH (STM-1) Converters

Ethernet over SDH / STM-1 (EoS) provides a simple, cost effective and compact solution to convert 10/100BaseT data interface on the user side and transport Ethernet traffic over a STM-1 SDH link and reconstruct the data back to ethernet frame format, at remote end. The converter is an effective method for converting and transporting 10/100BaseT ethernet data over an STM-1 (SDH) link.
Ethernet over SDH (STM-1) – Available bandwidth on four Ethernet ports (4VCG) on an STM-1 link (126Mbps bandwidth aggregated on 4 Ethernet ports).

Data Sheet (PDF)

Ethernet over DS3 converters

Valiant offers its Ethernet over DS3 Switch (Ethernet to DS3 Switch) packaged in a 1U, 19-inch rack-mountable chassis. Valiant Ethernet over DS3 Switch (Ethernet over DS3 Switch) provides a four 100BaseT Ethernet and 100Base-FX optical (optional) ethernet interfaces on the user side which may be used to transport Ethernet traffic over a DS3 link. Both ethernet interfaces may be used simultaneously. The Switch provides a simple and cost effective method to convert and transport ethernet data over an DS3 link.

Data Sheet (PDF)

Ethernet over E3 converters

Valiant offers its Ethernet to E3 converters (Ethernet over E3 Converters) packaged in a 19-inch rack-mountable chassis. Provides framed and un-framed E3 options. Valiant Ethernet to E3 converters (Ethernet over E3 Converters) provides a 100BaseT data interface on the user side which may be used to transport Ethernet traffic over a E3 link. The converter provides a simple and cost effective method to convert and transport 100BaseT ethernet data over a E3 link.

Data Sheet (PDF)

Ethernet over 8/16 E1 - ML-PPP

VCL-ETH-8E1-ML / VCL-ETH-16E1-ML Converter allows the user to send Ethernet data between two points or between multiple points (maximum 12 directions), over 8/16 E1 Links respectively. E1 Interfaces options are 75 Ohms/120 Ohms.

Data Sheet (PDF)

Ethernet over 1 E1

The VCL-ETH-E1 Interface Converter (Desktop Version) provides the user with Ethernet over E1 conversion enabling the user to transport Ethernet data over an E1 link. The equipment can be installed and used in pairs, with one terminal being installed at either end of the network. This equipment can also be used with VCL-ETH-8-ML and VCL-ETH-16-ML (8E1/16E1 ponit-to-point IP over TDM product) to meet various application requirements..

Data Sheet (PDF)

4 Ethernet over E1

Converts and transports upto 4 x Ethernet links over 1 E1 link in a shared mode, or a discreet mode. (Standard Version).

Data Sheet (PDF)

4 Ethernet over T1

Valiant offers its 4 x Ethernet over T1 (IP over TDM) package in a 1U High, 19-inch rack-mountable chassis. It provides four 10/100BaseT (4 RJ-45) data interfaces on the user side which may be used to transport Ethernet traffic over a T1 link. The converter provides a simple and cost effective method to convert and transport Ethernet data over a T1 link.

Data Sheet (PDF)

Ethernet over 4 E1

Ethernet over 4E1 Converter allows the user to send Ethernet data, between two points, over E1 Links. E1 Interfaces are 75 Ohms / 120 Ohms. Ethernet Interface options may be ordered as 10/100 Base-T Electrical Ethernet or 100Base-FX Optical Ethernet over 850nm / 1310nm / 1550nm single mode optical fiber interfaces.

Data Sheet (PDF)

Ethernet over 8 E1

Ethernet over 8E1 Converter allows the user to send Ethernet data, between two points, over E1 Links. E1 Interfaces are 75 Ohms / 120 Ohms. Ethernet Interface options may be ordered as 10/100 Base-T Electrical Ethernet or 100Base-FX Optical Ethernet over 850nm / 1310nm / 1550nm single mode optical fiber interfaces.

Data Sheet (PDF)

Ethernet over 16 E1

Ethernet over 16E1 Converter allows the user to send Ethernet data, between two points, over E1 Links. E1 Interfaces are 75 Ohms / 120 Ohms. Ethernet Interface options may be ordered as 10/100 Base-T Electrical Ethernet or 100Base-FX Optical Ethernet over 850nm / 1310nm / 1550nm single mode optical fiber interfaces.

Data Sheet (PDF)

SDH / STM-1 Optical to SDH / STM-1 Electrical converters

Valiant offers STM-1 Optical to STM-1 Electrical converter provides a simple and cost-effective conversion between STM-1 optical interface and STM-1 electrical interface. STM-1 Optical to STM-1 Electrical converter is an interface conversion equipment supplied with one STM-1 electrical (75 Ohms BNC) interface and one STM-1 optical (MSA compliant SFP) interface.

Data Sheet (PDF)

Oil and Gas

Valiant offer a wide range of communication solutions for Oil & Gas networks. Solutions include GPS synchronization solutions (nano second accurancy), IP/Ethernet backbone technologies, SCADA, Monitoring and Surveillance, Video & CCTV, Analog Voice FXO/FXS/E&M, Hotline, LAN, Emergency Alarm systems, VoIP services etc. Wide range of interafces offered include: IP/Ethernet, Gigabit Ethernet, E1, SDH, X.21/V.35, RS-232/V.24 (Synchronous / Asynchronous), N x 64 kbps Communication solutions for Oil & Gas networks includes PTP IEEE-1588v2 Synchronization solutions, GPS Primary Reference Clocks, NTP Servers, E1 PDH Multiplexers with low speed data (asynchronous and synchronous) for traffic control communications, 1+1 Protection Switching equipment for network redundancy.

Valiant offers complete Design, Manufacture, Installation Services for Oil & Gas communications and synchronization solutions.

  • Comprehensive Range of Products
  • Complete Communications and Synchronization Package from a single vendor
  • No interconnect or interoperability issues

Communication Products includes:

  • PDH Multiplexers: Voice and Data Multiplexers with 1+1 Control Card, E1 Card and Voice and Data Card level protection (1+1 Channel Level Protection @ 64Kbps).
  • SDH Multiplexers: STM-1, STM-4 and STM-16
  • Packet-Optical Multiplexes: May be used to Gigabit Ethernet as well as legacy voice and data channels from a single unified chassis.

Time and Frequency Synchronization Products include:

  • GPS Primary Reference Clocks
  • GPS NTP Servers
  • Sub-Master Clocks
  • Station Time Display Clocks

Oil & Gas Network communications equipment solutions includes PTP IEEE-1588v2 Synchronization, GPS Primary Reference Clocks, Sub-Master Clocks, NTP Servers, Time Display units, SCADA E1 PDH Multiplexers with low speed data (asynchronous and synchronous) for management and control, 1+1 Protection Switching equipment for critical network redundancy and Packet Optical Transport equipment with a wide range of legacy and modern digital interfaces.

Railways and Metro Network Communication solutions

Valiant offer a wide range of Modern Railways and Metro Networks communications and synchronization solutions.

  • Comprehensive Range of Products
  • Complete Communications and Synchronization Package from a single vendor
  • No interconnect or interoperability issues
  • Communication Products includes:

    • PDH Multiplexers: Voice and Data Multiplexers with 1+1 Control Card, E1 Card and Voice and Data Card level protection (1+1 Channel Level Protection @ 64Kbps).
    • SDH Multiplexers: STM-1, STM-4 and STM-16
    • Packet-Optical Multiplexes: May be used to Gigabit Ethernet as well as legacy voice and data channels from a single unified chassis.

    Time and Frequency Synchronization Products include:

    • GPS Primary Reference Clocks
    • GPS NTP Servers
    • Sub-Master Clocks
    • Station Time Display Clocks

    Railways and Metro Networks communications equipment includes PTP IEEE-1588v2 Synchronization solutions, GPS Primary Reference Clocks, Sub-Master Clocks, NTP Servers, Time Display units, E1 PDH Multiplexers with low speed data (asynchronous and synchronous) for traffic control communications, 1+1 Protection Switching equipment for critical network redundancy and Packet Optical Transport equipment with a wide range of legacy and modern digital interfaces.

    Airport Communications

    Airport Communications and control centers use wide range of communications systems including voice, high speed data, low speed data (asynchronous and synchronous), Ethernet.

    Valiant Communications offers wide range of Airport Communications equipment including PTP IEEE-1588v2 Synchronization solutions, GPS Primary Reference Clocks, NTP Servers, E1 PDH Multiplexers with low speed data (asynchronous and synchronous) for Radar and Air Traffic Control communications, 1+1 Protection Switching equipment for critical network redundancy.

    Valiant has successful equipment installations at various international and regional airports including in India, (Delhi and Mumbai international airports) Turkey, Vietnam (Hanoi and HCMC), Sri Lanka, Thailand, Dubai International airport, Bangladesh (Air Force), South Africa (Air Force) Jordan (Air Force).

    Valiant offers complete Design, Manufacture, Installation Services for Airport Communication networks.

    • Comprehensive Range of Products
    • Complete Communications and Synchronization Package from a single vendor
    • No interconnect or interoperability issues

    Communication Products includes:

    • PDH Multiplexers: Voice and Data Multiplexers with 1+1 Control Card, E1 Card and Voice and Data Card level protection (1+1 Channel Level Protection @ 64Kbps).
    • SDH Multiplexers: STM-1, STM-4 and STM-16
    • Packet-Optical Multiplexes: May be used to Gigabit Ethernet as well as legacy voice and data channels from a single unified chassis.

    Time and Frequency Synchronization Products include:

    • GPS Primary Reference Clocks
    • GPS NTP Servers
    • Sub-Master Clocks
    • Station Time Display Clocks

    Airport communications equipment includes PTP IEEE-1588v2 Synchronization solutions, GPS Primary Reference Clocks, Sub-Master Clocks, NTP Servers, Time Display units, E1 PDH Multiplexers with low speed data (asynchronous and synchronous) for traffic control communications, 1+1 Protection Switching equipment for critical network redundancy and Packet Optical Transport equipment with a wide range of legacy and modern digital interfaces.

    Mobile Backhaul

    Valiant offer a wide range of communication solutions for Mobile and Cellular networks.

    Customers using Valiant manufactured equipment include Telefónica Spain, British Telecom, France Telecom, Cable & Wireless, Etisalat (UAE, Nigeria, Afghanistan) Harris, CapRock, Mobifone Vietnam, Celltel Malaysia, PT. INDOSAT Indonesia, Alestra - ATT Mexico, BSNL India, Bharti Airtel India etc.

    Solutions include TDM over Ethernet/IP/MPLS solutions, Hi-Z Grooming and Monitoring solutions, GPS Primary Reference Clocks, PTP IEEE-1588v2 Synchronization solutions, NTP Servers, 1+1 Protection Switching equipment for network redundancy.

    Valiant offers complete Design, Manufacture, Installation Services for Mobile and Cellular communication networks.